Welcome
Login / Register

Computer


  • How to Boost Up Internet Speed Using DNS Hack?

    How to Boost Up Internet Speed Using DNS Hack?

    To get faster internet speeds and better security, you have to use free “OpenDNS” service. Alternatively, you can use also use Google DNS services for boosting up your internet speed. Whereas OpenDNS is most recommended and completely free. Just follow the simple steps below. So you can use OpenDNS as an alternative DNS server instead of your default DNS.

    OpenDNS

    Step 1: To get high speed internet using OpenDNS, you have to open the Control Panel First.

    Step 2: Go to Control Panel>> “Network and Internet options.”

    Hack-DNS-Server-To-Get-Faster-Internet-speed-1

    Step 3: Now, click on the “Network and Sharing Center.”

    Hack-DNS-Server-To-Get-Faster-Internet-speed-2

    Step 4: Now, just click on “Internet connection” and then click on “properties.”

    Hack-DNS-Server-To-Get-Faster-Internet-speed-3

    Step 5: Click on the Internet Protocol version 4 (TCP/Ipv4) and click on properties. 

    Hack-DNS-Server-To-Get-Faster-Internet-speed-4

    Step 6: Now choose the following DNS server addresses to get faster internet speed.

    Preferred DNS server: 208.67.222.222

    Alternate DNS server: 208.67.220.220

    Hack-DNS-Server-To-Get-Faster-Internet-speed-5

    Step 7: Now, you’re using OpenDNS server that helps to get better Internet speed.

    To Configure IPv6:

    As you have configured IPv4 above, just highlighting the “Internet Protocol Version 6 (TCP/Ipv6)” and click on the properties and choose the preferred DNS server address.

    • Preferred DNS server:2620:0:ccc::2
    • Alternate DNS server:2620:0:ccd::2

    Google DNS          

    If you’re not happy with OpenDNS you can alternatively use Google DNS to get faster speed.

    For IPv4: 8.8.8.8 and 8.8.4.4.

    For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844

    There’re so many advantages using OpenDNS and Google DNS other getting a faster internet speed. If your DNS server of internet service provider (ISP) goes down, then you’ll unable to make use of the internet. But, if you are using Google DNS or OpenDNS method, then you can peacefully browse the internet when your default DNS is goes down.

    Both Google DNS and OpenDNS work well but, people prefer Google DNS over OpenDNS. You can choose anyone to boost up internet connection. You need to just follow the simple steps explained above.

    Read more »
  • How to Add a Wireless or Network Printer in Windows 10

    Manage Printers in Windows 10

    To get to the Control Panel printer manager, click on Devices and Printers

    wifi_router

    You’ll see a list of all your printers and other devices that may be on the network. The other way is to click on Start, then Settings and then click on Devices.

    wireless_printer

    There’s really no reason for there to be two ways to do this, but that’s just how it is currently in Windows 10. You can pick either way and you’ll get all the same options, so it doesn’t really matter.

    Adding a Printer in Windows 10

    Now let’s get into the actual steps for adding a printer to Windows 10. In this article, we are assuming that you have connected your printer to either the wireless network or wired network. As long as your router is giving out IP addresses automatically using DHCP, getting your printer connected to the network should be straight-forward.

    For wireless printers, just refer to the instructions on how to configure the printer with the wireless network settings. Most new wireless printers allow you to do this on the on-screen display of the printer, but some older wireless printers require you to connect the printer directly to a computer first, configure the wireless settings and then disconnect it.

    Once the printer is connected, go ahead and click on Add a printer in the Devices and Printers dialog on your PC.

    device_printer

    Read more »
  • Alt Plus Symbols

    How to Use Symbols

    First select the symbol then you can drag&drop or just copy&paste it anywhere you like.

    Alt-Codes can be typed on Microsoft Operating Systems:

    • First make sure that numlock is on,Then press and hold the ALT key,
    • While keeping ALT key pressed type the code for the symbol that you want and release the ALT key.Alt Codes

      Alt Codes, list of alt key codes alt symbols and characters. Alt code characters table from 0-255 decimal numbers.

    Alt Plus Symbols. Daily Used Symbols . Few symbols we need daily which we chat with friends. So its good if we know the code of the symbol.

    ☺ = Alt+1

    ☻ = Alt+2

    ♥ = Alt+3

    ♦ = Alt+4

    ♣ = Alt+5

    ♠ = Alt+6

    • = Alt+7

    ◘ = Alt+8

    ○ = Alt+9

    ◙ = Alt+10

    ♂ = Alt+11

    ♀ = Alt+12

    ♪ = Alt+13

    ♫ = Alt+14

    ☼ = Alt+15

    ► = Alt+16

    ◄ = Alt+17

    ↕ = Alt+18

    ‼ = Alt+19

    ¶ = Alt+20

    § =Alt+21

    ↨=23

    ↑=24

    ↓=25

    →=26

    ←=27

    ↔=29

    ▲=30

    π=227

    £=156

    $=36

    ½=171

    ¼=172

    Read more »
  • CCleaner to Clean Your PC

    Your C drive some time get full and your computer speed also get slow because of that. but when we try to solve the problem by deleting the files but in C drive many important windows files are there so we cant delete as whole.

    So i Suggest you CCleaner to delete all temporary files and junk files.

    you can choose which files you want to delete and application also.

    C Cleaner works to find and remove the temporary file in the computer quickly. It can also repair the registry in Windows.

    CCleaner_to_Clean_Your_PC

    Get CCleaner here


    What is a temporary file?

    When any one program run in Windows, it will create a temporary memory or file called a temporary file. However, after the program is closed, the temporary file is left unattended. Over time this is getting a lot of temporary files and would waste space on the hard disk.

    CCleaner can also delete history for Internet Explorer, Firefox, Opera, and many other applications, including Media Player, Kazaa, Google Toolbar, and more.

    Read more »
  • Enable Task Manager disabled by Administrator or Virus in Windows

    task_manager_disabled

    Method 1:Enable Task Manager from Registry in Windows 10, Windows 8, 7, or XP
    Registry Editor is an inbuilt Windows tool that is used to modify registry keys which tell Windows how it should work. A simple registry modification can be used to bypass the Task Manager block. To do so, just follow the steps:-

    1. Click on Start. Go to Run. Alternatively, use Windows key+R keyboard shortcut.
    2. Type regedit and press Enter. Registry Editor will start. If Registry Editor is also disabled, you will first need to enable registry editing.
    3. Through the left hand navigation pane, navigate to HKEY_CURRENT_USERSoftwareMicrosoft Windows Current VersionPoliciesSystem. If the System key is not there, you will need to create it.
    4. In the work area, locate "DisableTaskMgr". If this value is not there, you will need to create a new DWORD value called DisableTaskMgr. Double click on it. A window will pop up.
    5. Enter its value data as 0 and press OK.
    6. Close Registry Editor. If Task Manager is still disabled, restart your computer

    Method 2:Enable Task Manager from the Group Policy Editor (Gpedit.msc)
    Group Policy Editor is a feature in Windows which is used to edit local policy settings. It can also be used to enable Task Manager. To do so, just follow the steps given below:-

    1. Open Start Menu. Windows XP users click on Run. Windows 10, Windows 8.1, Windows 8, Windows 7 and Vista users, go to Search. Alternatively, press Windows key+R.
    2. Type gpedit.msc and press Enter. Group Policy Editor Window will show up.
    3. From the navigational pane at the left hand side, go to: User Configuration>Administrative Templates>System>Ctrl+Alt+Del Options.
    4. In the work area, double click on "Remove Task Manager" and set its value to Disabled or Not Configured.
    5. Restart your Computer or Log Off and Log back On to apply the changes.
      Group Policy Editor is not available on home editions of Windows.

    Method 3:Enable Task Manager by Running a CMD Command
    Command Prompt can also be used to directly enable Task Manager.
    1. Open Notepad.
    2. Copy the code given below and paste it. 
    REG add HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem /v DisableTaskMgr /t REG_DWORD /d /0 /f
    3. Save the File as TaskManager.bat.
    4. Run TaskManager.bat as Administrator if you use Windows 10, Windows 8, Windows 7 or Windows Vista. In Windows XP, simply open the file. A command prompt window will flash for a second and then disappear indicating successful execution. After running the batch file, you will be able to again use Task Manager. If Task Manager is still not available, restart your computer.
     

    Read more »
RSS